Click to enlarge
ADATA SX6000NP Lite M.2 PCIe ASX6000LNP-1TT-C SSD
Back to products
Adata Ultimate SU630 Sata SSD 240GB / 480GB / 960GB / 1.92TB / 3.84TB

Team T-Force CARDEA II M.2 PCIe SSD -1TB, 512GB, 256GB

CARDEA II M.2 PCIe SSD supports the new generation PCIe Gen3 x4 high speed interface and the latest NVMe1.3 protocol. … II M.2 PCIe SSD. 1TB, 512GB, 256GB.
Interface: PCIe 3.0 x4 with NVMe 1.3
Operating System: 1. System Requirements:: …
Capacity: 256GB / 512GB / 1TB
Color: Red
Compare
Add to wishlist
Description

CARDEA II M.2 PCIe SSD 1TB, 512GB, 256GB

FEATURES
  • Cooling module with gaming fin type design can provide effective cooling for continuous and high-intensity use.
  • High performance superconductivity – Thermally conductive adhesive offers average heat radiating, instantaneously thermal energy transfer and accelerates the radiating process.
  • Extreme read/write speed – Over 3,400[1] of reading speed can enhance the speed and performance of the overall system.
  • PCIe interface – Support latest NVMe specification.
  • Support S.M.A.R.T. technology – Monitoring hard drive status efficiently.
  • Support TRIM – Bring out its best performance on the compatible operating system.
  • Product warranty – 5-year product warranty. Free technical support service.
  • Taiwan Utility PATENT (number: M541645)
  • Model CARDEA II
    Interface PCIe 3.0 x4 with NVMe 1.3
    Capacity 256GB / 512GB / 1TB[2]
    Color Red
    Voltage DC +3.3V
    Operation Temperature 0˚C ~ 70˚C
    Storage Temperature -40˚C ~ 85˚C
    Terabyte Written 256GB / 380 TB
    512GB / 800 TB
    1TB / 1,665TB[3]
    Performance Crystal Disk Mark:
    256GB Read/Write: up to 3,000/1,000 MB/s
    512GB Read/Write: up to 3,400/2,000 MB/s
    1TB Read/Write: up to 3,400/3,000 MB/s[1]    		 IOPS:
    256GB Read/Write: 200K/200K IOPS Max
    512GB Read/Write: 350K/300K IOPS Max
    1TB Read/Write: 450K/400K IOPS Max[1]
    Weight 45g
    Dimensions 80.1(L) x 23.4(W) x 12.9(H) mm
    Humidity RH 90% under 40°C (operational)
    Vibration 80Hz~2,000Hz/20G
    Shock 1,500G/0.5ms
    MTBF 2,000,000 hours
    Operating System 1. System Requirements:

    • Windows 10 / 8.1 / 8 / 7 / Vista[4]
    • Linux 2.6.33 or later

    2. This product has a heat sink, recommended the use of desktop only.

     

PCIe Gen3 SSD – A great leap forward in performance!

PCIe Gen3 SSD – A great leap forward in performance!

 

It supports the new generation PCIe Gen3 x4 high-speed interface and the latest NVMe1.3 protocol. The outstanding performance of sequential read/write speed is up to 3400/3000 MB/s, and the random read/write speed is up to 450K/400K IOPS[1]. It is able to deliver the smoothest high-speed performance without any lag even reading/writing large amounts of game data, complex 3D graphics and motion processing algorithms with fancy special effects.

 

Patent module increases radiating performance by 15%

 

Using Team Group’s cooling module with patent gaming fin type design, it allows natural convection or forced air cooling (e.g. fan) to enhance radiating. After long and rigorous internal laboratory tests and burn-in test, it was proven that it can be cooled down about 30℃ in an open space, and 10℃ in a closed space. This offers a more stable performance and prolongs the service life of SSD effectively.

 

Patent module increases radiating performance by 15%
Superconductivity – Instantaneous heat transfer

Superconductivity – Instantaneous heat transfer

 

We introduce the super conductive thermal adhesive that is researched and produced by Canada. It has a higher cooling coefficient than ice, which has a K value of 2. The radiating performance of SSD can be pushed to the extreme with instantaneous heat transfer.

Thermal Conductivity:
K value is used to represent thermal conductivity. The greater the K value is, the more heat transfers. For example, the K value of water is 0.6, and the K value of ice is 2.

 

NVMe – No more lag

The T-FORCE M.2 PCIe SSD – CARDEA II supports the latest NVMe 1.3 protocol. The system communicates with it through PCI-e bus and connects to the built-in PCI-e controller of the chipset or processor, so the signal transfer is as simple and precise as point to point. The T-FORCE M.2 PCIe SSD – CARDEA II offers you a pleasant high-performance transfer experience, without a bit of lag or delay.

NVMe - No more lag
Transfer speed is 5 times higher than the SATA III interface

Transfer speed is 5 times higher than the SATA III interface

 

Adopts latest ultra-fast PCIe Gen3 x4 interface, supports NVMe 1.3 specs, and is equipped with DRAM Cache to push read/write speeds to over 3,400/3,000MB/s[1]. The transfer speed is 5 times higher than SATA 6GB/s interface and allows consumers to enjoy the high speed multimedia entertainment experience.

 

Smart technology – Dependable reliability

T-FORCE M.2 PCIe SSD – CARDEA II supports S.M.A.R.T function and its built-in smart algorithm management mechanism has functions such as GC (garbage collection) and TRIM command which are able to ensure operation efficiency, prolong the service life of the SSD and bring it to its maximum performance. Meanwhile, the powerful Wear-Leveling technology and ECC (Error Correction Code) function improve the accuracy and reliability of data transfer.

Smart technology – Dependable reliability
T-FORCE

T-FORCE

T-FORCE is TEAM force. The red “T” on the logo of “TF” represents TEAMGROUP’s passion for the storage products. The black “F” represents TEAMGROUP’s over 18 years of promotion of storage products. The visual design of the perfect combination elegantly symbolizes a pair of flying wings. They represent that the high quality and extreme performance gaming products from TEAMGROUP are capable of allowing all gamers to break the speed limit and enjoy the ever-changing world of gaming

 

  • Team T-Force CARDEA II M.2 PCIe SSD -1TB, 512GB, 256GB Supports the new generation T-FORCE M.2 PCIe SSD – Buy-Dubai, UAE, Oman, Kuwait Click link for more details

.